BMW 5 Series: Deactivating/activating DTC Dynamic Traction Control
Activating the Dynamic Traction Control DTC provides maximum traction on loose ground.
Driving stability is limited during acceleration and when driving in bends.
Activating DTC
Press the button.
TRACTION is displayed in the instrument cluster and the indicator lamp for DSC lights up.
Deactivating DTC
Press the button again.
TRACTION and the DSC indicator lamp go out.
Indicator/warning lamps
When DTC is activated, TRACTION is displayed in the tachometer.
The indicator lamp lights up: DTC Dynamic Traction Control is activated.
The concept
The DTC system is a version of the DSC in which forward momentum is optimized. The system ensures maximum forward momentum on special road conditions, e.g., unplowed snowy roads, but driving st ...xDrive
xDrive is the all-wheel-drive system of your vehicle. Concerted action by the xDrive and DSC further optimize traction and driving dynamics. The xDrive all-wheel-drive system variably distributes ...See also:
Warning Lights and Beep Sounds
System Malfunction Warning Light
If any malfunction occurs in the advanced keyless function, the KEY warning light
(red) in the instrument cluster illuminates continuously.
CAUTION:
If the KEY wa ...
Tire tread
Summer tires
Do not drive with a tire tread depth of less than
0.12 in/3 mm.
There is an increased danger of hydroplaning if
the tread depth is less than 0.12 in/3 mm.
Winter tires
Do not driv ...
MODE button
This button is used to select the desired audio mode. Each time it is pressed,
the mode changes to the next one in the following sequence.
*1: The frequency last received in the selected waveba ...