Subaru Legacy: Determining compatibility of tire and vehicle load capacities - Tire information - Consumer information and Reporting safety defects - Subaru Legacy Owners ManualSubaru Legacy: Determining compatibility of tire and vehicle load capacities

The sum of four tires’ maximum load ratings must exceed the maximum loaded vehicle weight (“GVWR”). In addition, sum of the maximum load ratings of two front tires and of two rear tires must exceed each axle’s maximum loaded capacity (“GAWR”). Original equipment tires are designed to fulfill those conditions.

The maximum loaded vehicle weight is referred to Gross Vehicle Weight Rating (GVWR). And each axle’s maximum loaded capacity is referred to Gross Axle Weight Rating (GAWR). The GVWR and each axle’s GAWR are shown on the vehicle certification label affixed to the driver’s door.

The GVWR and front and rear GAWRs are determined by not only the maximum load rating of tires but also loaded capacities of the vehicle’s suspension, axles and other parts of the body.

Therefore, this means that the vehicle cannot necessarily be loaded up to the tire’s maximum load rating on the tire sidewall.

    Calculating total and load capacities varying seating configurations
    Calculate the available load capacity as shown in the following examples: Example 1A Vehicle capacity weight of the vehicle is 800 lbs (363 kg), which is indicated on the vehicle placard with th ...

    Adverse safety consequences of overloading on handling and stopping and on tires
    Overloading could affect vehicle handling, stopping distance, vehicle and tire as shown in the following. This could lead to an accident and possibly result in severe personal injury. ● Veh ...

    See also:

    Automatic Hold
    The concept This system assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when it is s ...

    General information
    This system consists of inflatable curtains located along the sides of the roof liners, stretching from the center of both front side windows to the rear edge of the rear side door windows. It i ...

    Main components of occupant classification system
    • A detection device located within the front passenger seat frame. • Electronic system to determine whether the front passenger air bag system should be activated or deactivated. • A warnin ...