BMW 5 Series: Determining the load limit
Determining the load limit
1. Locate the following statement on your vehicle’s placard:
▷ The combined weight of occupants and
cargo should never exceed XXX kg or
YYY lbs. Otherwise, damage to the vehicle
and unstable driving situations may
result.
2. Determine the combined weight of the
driver and passengers that will be riding in
your vehicle.
3. Subtract the combined weight of the driver
and passengers from XXX kilograms or YYY
pounds.
4. The resulting figure equals the available
amount of cargo and luggage load capacity.
For example, if the YYY amount equals
1,000 lbs and there will be four 150 lbs passengers
in your vehicle, the amount of available
cargo and luggage load capacity is
400 lbs: 1,000 lbs minus 600 lbs = 400 lbs.
5. Determine the combined weight of luggage
and cargo being loaded on the vehicle. That
weight may not safely exceed the available
cargo and luggage load capacity calculated
in Step 4.
General information
Overloading the vehicle
To avoid exceeding the approved carrying
capacity of the tires, never overload the vehicle.
Overloading can lead to overheating and increases
the rate at which damage de ...
Load
The maximum load is the sum of the weight of
the occupants and the cargo.
The greater the weight of the occupants, the
less cargo that can be transported ...
See also:
Fan speed control
Turn the fan control dial left
or right to
manually control the fan speed.
Press the OFF button to turn the
system
off.
Press the AUTO button to return to automatic
control of the fan speed. ...
S mode
●When the shift range is “4” or lower, holding the shift lever toward “+”
sets
the shift range to “6”.
●To prevent the engine from over-revving, upshifting may automatical ...
Trip odometers
Trip odometers and reset button
1 - Odometer display
2 - Button for toggling between T1 and T2, and for resetting the odometer
The trip odometers are used to measure short distances. A short pres ...
