BMW 5 Series: Displaying the button assignment - Programmable memory 
buttons - iDrive - At a glance - BMW 5 Series Owners ManualsBMW 5 Series: Displaying the button assignment

Use a finger to touch the buttons. Do not wear gloves or use objects.

The key assignment is displayed at the top edge of the screen.

Displaying the button assignment
Displaying the button assignment

▷ To display short information: touch the button.
▷ To display detailed information: touch the button for an extended period.

    Running a function
    Press the button. The function will run immediately. This means, for example, that the number is dialed when a phone number is selected. ...

    Deleting the button assignments
    1. Press buttons 1 and 8 simultaneously for approx. five seconds. 2. "OK" ...

    See also:

    Automatic Transaxle Fluid (ATF)
    Inspecting Automatic Transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. 2.5-liter engine CAUTION: Always check the automatic ...

    To Enter Remote Start Mode
    Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will ...

    Adaptive Drive
    The concept Adaptive Drive includes the following systems: ▷ Dynamic Drive ▷ Dynamic Damping Control The system increases driving stability and driving comfort. ...