Nissan Maxima: Drive belt
1. Power steering fluid pump.
2. Generator.
3. Air conditioner compressor.
4. Crankshaft pulley.
WARNING:
Be sure the ignition switch is in the OFF or LOCK position before servicing drive belt.
The engine could rotate unexpectedly.
1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is loose, have it replaced or adjusted by a NISSAN dealer.
2. Have the belt checked regularly for condition and tension in accordance with the maintenance schedule found in the NISSAN Service and Maintenance Guide.
Variable voltage control system
CAUTION:
- Do not ground accessories directly to the battery terminal. Doing so will bypass
the variable voltage control system and the vehicle battery may not charge completely.
- Use electrica ...
Replacing spark plugs
Iridium-tipped
spark plugs
It is not necessary to replace iridium-tipped (A) spark plugs as frequently as
conventional type spark plugs because they last much longer. Follow the maintenan ...
See also:
Draining of coolant water
If the vehicle is to be left outside without antifreeze,
drain the cooling system, including the
engine block. Refill before operating the vehicle.
For details, see “Changing engine coolant” in ...
Shifting to transmission position D
•► When the vehicle is stationary, depress the
brake pedal.•► Push the DIRECT SELECT lever down past
the first point of resistance. ...
Playback
Loading the CD/DVD player
Insert the CD/DVD with the printed side up.
Playback begins automatically.
Reading can take a few minutes with compressed
audio files.
Starting playback
A CD/DVD is lo ...
