Nissan Altima: Driving on snow or ice - Cold weather driving - Starting and driving - Nissan Altima Owners ManualNissan Altima: Driving on snow or ice

WARNING

● Wet ice (32°F, 0°C and freezing rain), very cold snow or ice can be slick and very hard to drive on. The vehicle will have much less traction or “grip” under these conditions. Try to avoid driving on wet ice until the road is salted or sanded.

● Whatever the condition, drive with caution. Accelerate and slow down with care. If accelerating or downshifting too fast, the drive wheels will lose even more traction.

● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement.

● Allow greater following distances on slippery roads.

● Watch for slippery spots (glare ice). These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reaching it. Try not to brake while on the ice, and avoid any sudden steering maneuvers.

● Do not use the cruise control on slippery roads.

● Snow can trap dangerous exhaust gases under your vehicle. Keep snow clear of the exhaust pipe and from around your vehicle.

    Special winter equipment
    It is recommended that the following items be carried in the vehicle during winter: ● A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades. ● A ...

    Engine block heater (if so equipped)
    WARNING ● Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. You can be seriously injured by an electrical shock if you use an ungrounded conne ...

    See also:

    The tire pressure warning light may come on due to natural causes (vehicles with a tire pressure warning system)
    The tire pressure warning light may come on due to natural causes such as natural air leaks and tire inflation pressure changes caused by temperature. In this case, adjusting the tire inflation pre ...

    Engine oil and oil filter recommendations
    ...

    Random playback
    Type A audio Type B audio To play back a track/file(s) at random, press the “RPT/RDM” button for 0.5 second or longer (type A audio) or press the “RDM” button (type B audio). ● ...