BMW 5 Series: Engaging the transmission position
▷ Transmission position P can only be disengaged
if the engine is running and the brake
pedal is pressed.
▷ With the vehicle stationary, press on the
brake pedal before shifting out of P or N;
otherwise, the shift command will not be
executed: shift lock.
Depress the brake until you start driving
To prevent the vehicle from creeping after
you select a driving position, maintain pressure
on the brake pedal until you are ready
to start.◀
Engaging D, R and N
Briefly push the selector lever in the desired direction, beyond a resistance point if necessary.
After releasing the selector lever, it returns to its center position.
Press unlock button, in order to:
▷ Engage R.
▷ Shift out of P.
Engaging P
Press button P.
Transmission positions
D Drive, automatic position Position for normal vehicle operation. All forward gears are available. R is Reverse Select only when the vehicle is stationary. N is Neutral Use in automatic car wa ...Sport program DS and manual mode M/ S
Push the selector lever to the left out of transmission position D. DS is displayed in the instrument cluster. The sport program of the transmission is activated. Activating the M/S manual mode ...See also:
Autostick ā if equipped
AutoStick is a driver-interactive transmission that offerssix manual ratio changes
to provide you with morecontrol. AutoStick allows you to maximize engine braking,eliminate
undesirable upshifts a ...
Using a flat-bed truck
This is the best way to transport your vehicle. Use the following procedures
to ensure safe transportation.
1. Shift the select lever into the āPā position for AT and CVT models or the
shif ...
Lighting
1 When turning the switch to the
position,
the front parking, tail, license plate and
instrument panel lights come on.
2 When turning the switch to the
position,
the headlights come on and ...