Dodge Avenger: Engine block heater — if equipped - Starting and operating - Dodge Avenger Owners ManualDodge Avenger: Engine block heater — if equipped

Dodge Avenger / Dodge Avenger Owners Manual / Starting and operating / Engine block heater — if equipped

The engine block heater warms the engine, and permitsquicker starts in cold weather. Connect the cord to astandard 110-115 Volt AC electrical outlet with agrounded, three-wire extension cord.

The engine block heater cord is bundled under the hoodbetween the headlight assembly and the Totally IntegratedPower Module (Fuse Box) on the driver’s side ofthe vehicle.

WARNING:

Remember to disconnect the cord before driving.

Damage to the 110-115 Volt electrical cord could causeelectrocution.

    Starting procedures
    Before starting your vehicle, adjust your seat, adjust theinside and outside mirrors, fasten your seat belt, and ifpresent, instruct all other occupants to buckle their seatbelts. WARNING: Never ...

    Automatic transmission
    CAUTION: Damage to the transmission may occur if the followingprecautions are not observed: • Shift into PARK only after the vehicle has come toa complete stop. • Shift into or out of REVERSE o ...

    See also:

    Wipers and washers
    A : Wiper speed control · MIST – Single wipe · OFF – Off · INT – Intermittent wipe · LO – Low wiper speed · HI – High wiper speed B : Intermittent or Auto control wipe time adju ...

    Fuel-filler cap
      The fuel-filler cap is a ratcheting type. Turn the cap counterclockwise to remove. To tighten, turn the cap clockwise until ratcheting clicks are heard. Put the fuel-filler cap on the cap ...

    Vehicle storage
    If you will not be using your vehicle for more than21 days, you may want to take steps to preserve yourbattery. • Disengage the mini-fuse in the Power DistributionCenter labeled IOD (Ignition O ...