Mercedes-Benz E-Class: Engine oil - Service products and capacities - Technical data - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Engine oil

Please bear the following in mind

The engine oils are matched to the performance of Mercedes-Benz engines and service intervals. You should therefore only use engine oils and oil filters that are approved for vehicles with maintenance systems.

For a list of approved engine oils and oil filters, consult an authorized Mercedes-Benz Center or go to the Internet site http://www.mbusa.com (USA only).

Never use engine oil or an oil filter of a specification other than is necessary to fulfill the prescribed service intervals. Do not change the engine oil or oil filter in order to achieve longer replacement intervals than those prescribed. You could otherwise cause engine damage or damage to the exhaust gas aftertreatment.

Follow the instructions in the service interval display regarding the oil change.

Otherwise, you may damage the engine and the exhaust gas aftertreatment.

The table shows which engine oils have been approved for your vehicle.

MB approval is indicated on the oil

MB approval is indicated on the oil containers.

Additives

Do not use any additives in the engine oil.

This could damage the engine.

Engine oil viscosity

Viscosity describes the flow characteristics of a fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity means that it is thin.

Select an engine oil with an SAE (viscosity) classification suitable for the prevailing outside temperatures. The following table shows the correct SAE classification to be used. The low-temperature characteristics of engine oils can deteriorate significantly, e.g.

as a result of aging, soot and fuel deposits. It is therefore strongly recommended that you carry out regular oil changes using an approved engine oil with the appropriate SAE classification.

Refrigerant of the air-conditioning

    DEF
    Important safety notes For BlueTEC vehicles only. DEF is a non-flammable, non-toxic, colorless, odorless and water-soluble fluid. Rinse surfaces that have come into contact with DEF immediately ...

    Refrigerant of the air-conditioning system
    The air-conditioning system is filled with R134a refrigerant and a special PAG lubricant. Never use refrigerant R 12 (CFC) or mineral lubricants. Otherwise, you could damage the air-condition ...

    See also:

    Important safety notes
    WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle ...

    System Setup
    This command group allows you to change or customize HFL basic settings. To set a 4-digit passcode to lock the HFL system for security purposes: Press and release the HFL Talk button before ...

    Introduction
    The load carrying capacity of your vehicle is determined by factors such as the number of passengers, the amount of cargo, the weight of any accessories that may be installed, etc. To increase lo ...