Nissan Maxima: Entry/exit function
This system is designed so that the drivers seat and automatic operation steering column will automatically move when the shift selector is in the P (Park) position. This allows the driver to get into and out of the drivers seat more easily.
The drivers seat will slide backward and the steering wheel will move up when the drivers door is opened and the ignition switch is in the LOCK position.
The drivers seat and steering wheel will return to the previous position when the drivers door is closed and the ignition switch is pushed.
The entry/exit function can be adjusted or canceled.
See Comfort & Convenience settings in the Monitor, climate, audio, phone and voice recognition systems section of this manual.
Restarting the entry/exit function
If the battery cable is disconnected or if the fuse opens, the entry/exit function will be disabled.
Drive the vehicle over 25 MPH (40 km/h) to restart the entry/exit function. You can also restart the entry/exit function using the following procedure.
1. Connect the battery cable or replace the fuse.
2. Open and close the drivers door more than 2 times with the ignition switch in the LOCK position.
The entry/exit function should now work properly.
Memory storage function
Two positions for the drivers seat, steering column, and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the memory system. 1. Set the Con ...System operation
The automatic drive positioner system will not work or will stop operating under the following conditions: - When the vehicle speed is above 4 MPH (7 km/h). - When any of the memory switches are p ...See also:
Locks
The alarm indicator light on the dashboard will stop flashing to indicate that
the alarm is not monitoring the entire vehicle. The accessory movement and inclination
sensors will be automatically ...
When there is a malfunction in the system
If a system malfunction is detected due to any of the following reasons,
warning lights will turn on:
●There is a malfunction with the sensors
●The sensors have become dirty
●Th ...
3.5mm Jack
Connect a 3.5mm (1/8 in) cable to
the auxiliary input jack to use a
portable audio player.
Playback of an audio device that is
connected to the 3.5mm jack can
only be controlled using the con ...