Nissan Maxima: Environmental factors influence the rate of corrosion
Moisture
Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion.
Wet floor coverings will not dry completely inside the vehicle and should be removed for drying to avoid floor panel corrosion.
Relative humidity
Corrosion will be accelerated in areas of high relative humidity, especially those areas where the temperatures stay above freezing and where atmospheric pollution exists and road salt is used.
Temperature
High temperatures accelerate the rate of corrosion to those parts which are not well ventilated.
Air pollution
Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use accelerates the corrosion process. Road salt also accelerates the disintegration of paint surfaces.
Most common factors contributing to vehicle corrosion
-The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. - Damage to paint and other protective coatings caused by gravel and stone chips or mino ...To protect your vehicle from corrosion
-Wash and wax your vehicle often to keep the vehicle clean. - Always check for minor damage to the paint and repair it as soon as possible. - Keep drain holes at the bottom of the doors open to avoi ...See also:
Extended storage switch (if so
equipped)
NOTE:
The extended storage switch is used for
long term vehicle storage. Even if the extended
storage switch is broken it is not
necessary to replace it. Replace only the
open fuse in the switc ...
F.M.V.S.S./C.M.V.S.S. certification label
The Federal/Canadian Motor Vehicle Safety Standard (F.M.V.S.S./C.M.V.S.S.) certification
label is affixed as shown. This label contains valuable vehicle information, such
as: Gross Vehicle Weigh ...
Headlamp welcome function
When the headlight switch is in the ON or AUTO position and all doors (and trunk)
are closed and locked, if you press the door unlock button on the transmitter (or
the smart key), the headlights w ...