Nissan Altima: Exterior and interior lights
Coupe
1. Mirror-mounted turn signal light
(if so equipped)
2. Interior light
3. Map light
4. Headlamp assembly
5. Fog light (if so equipped)
6. Step light
7. High-mount stoplight
8. Trunk light
9. License plate light
10. Rear combination light
Sedan
1. Rear map light
2. Front map light
3. Step light
4. Headlamp assembly
5. Fog light (if so equipped)
6. High-mount stoplight (if so equipped)
7. Trunk light
8. Spoiler mounted stoplight
(if so equipped)
9. Rear combination light
10. License plate light
11. Mirror-mounted turn signal light
(if so equipped)
Replacement procedures
All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens, light and/or cover.
Indicates bulb removal
Indicates bulb installation
Step light
Use a cloth 1 to protect the housing.
Map light
Use a cloth to protect the housing.
Personal light (if so equipped)
Use a cloth 1 to protect the housing.
Interior light
Use a cloth 1 to protect the housing.
Rear combination light
To access the bulbs in the rear combination light:
1 Remove the fasteners. Carefully push back the carpet.
2 Remove the 2 nuts and pull out the rear combination light.
3 Rotate the bulb(s) counterclockwise and pull out to remove:
A Turn signal light
B Sidemarker light
C Tail/stop light
D Backup light
Trunk light
Front park/turn/sidemarker light
Bulb replacement requires the removal of the headlight assembly. If replacement is required, see your NISSAN dealer. ...Upper tether anchor/key cylinder covers
CAUTION Never force the covers into place because the hinge pins can be damaged. Follow the removal and installation instructions to prevent inoperability of the covers. ...See also:
Hazard warning flasher switch
Push the switch on to warn other drivers when you must stop or park under emergency
conditions.
All turn signal lights flash.
WARNING:
- If stopping for an emergency, be sure to move the vehicl ...
Removing the Flat Tire and
Installing the Spare Tire
1. Do a safety check before
proceeding. See If a Tire Goes
Flat for more
information.
2. Turn the wheel wrench
counterclockwise to loosen the
wheel nut caps.
If needed, finish loosening th ...
Department Of Transportation Uniform Tire
Quality Grades
The following tire grading categories were established by
the National Highway Traffic Safety Administration. The
specific grade rating assigned by the tire’s manufacturer
in each category is ...