Nissan Altima: FM/AM radio with compact disc (CD) player (if so equipped)
1. SEEK/TRACK button
2. CD insert slot
3. TUNE/FF·REW button
4. CD eject button
5. AUDIO button (BASS, TREBLE, FADE
and BALANCE)
6. CLOCK button
7. AUX IN jack
8. SCAN button
9. RDM/RPT button
10. PWR/VOL control knob
11. AUX button
12. RADIO button
13. CD button
14. DISP button
15. PRESET A·B·C button
16. Station select (1 - 6) buttons
17. pause/mute button
For all operation precautions, see “Audio operation precautions” earlier in this section.
Audio main operation
PWR/VOL control knob
Place the ignition switch in the ACC or ON position, then press the PWR/VOL control knob. If you listen to the radio with the engine not running, place the ignition in the ACC position. The mode (radio or CD) that was playing immediately before the system was turned off resumes playing.
When no CD is loaded, the radio comes on. Pressing the PWR/VOL control knob again turns the system off.
Turn the PWR/VOL control knob to the right to increase volume or to the left to decrease volume.
AUDIO button (Bass, Treble, Fade and Balance)
Press the AUDIO button to change the mode as follows:
Bass → Treble → Fade → Balance → Beep ON/OFF → Audio → Bass
To adjust Bass, Treble, Fade and Balance press the AUDIO button until the desired mode appears in the display. Press the TUNE/FF·REW or to adjust Bass and Treble to the desired level. You can also use the TUNE/FF·REW button to adjust Fade and Balance mode. Fade adjusts the sound level between the front and rear speakers and Balance adjusts the sound between the right and left speaker.
To turn the Beep sound off or on, press the AUDIO button until Beep is displayed. Press the TUNE/FF·REW button or until the desired mode is displayed. This turns on or turns off the beep sound when audio buttons are pressed.
Once you have adjusted the sound quality to the desired level, press the AUDIO button repeatedly until the radio or CD display reappears. Otherwise, the radio or CD display will automatically reappear after about 10 seconds.
DISP (display) button:
Pressing the DISP (display) button will show text about CD information in the audio display. If the text information is to long to fully be displayed on the screen; press and hold the DISP button for longer than 1.5 seconds to scroll through the rest of the text.
CD display mode
To change the text displayed while playing a CD with text, press the DISP button. The DISP button will allow you to scroll through CD text as follows: Track number and Track time → Album title → Song title.
● Track number displays the track number selected on the disc.
● Track time displays the amount of time the track has played.
● Album title displays the title of the CD being played.
● Song title displays the title of the selected
CD track.
Clock operation
Pressing the CLOCK button displays the clock with the radio on or off. Press the CLOCK button again to turn off the clock display.
Clock set
1. Press and hold the CLOCK button for approximately
2 seconds.
2. The display will show “H-Seek M-Tune”.
3. Press the SEEK/TRACK button
or to adjust the hours.
4. Press TUNE/FF·REW button
or to adjust the minutes.
5. Press the CLOCK button again to exit the
clock set mode.
The display will return to the regular clock display
after 10 seconds, or you may press the CLOCK
button again to return to the regular clock display.
pause/mute button:
To mute or pause the audio sound, press the pause/mute button. Press the button again to resume the audio sound.
CD, DVD or USB with Compressed Audio Files (models with Navigation System)
The file types supported by this system are MP3, WMA, AAC/M4A and ATRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well ...FM/AM radio operation
FM/AM band select: Pressing the RADIO button will change the band as follows: AM ←→ FM When the RADIO button is pressed while the ignition switch is in the ACC or ON position, the ra ...See also:
Remote keyless entry system and the driver's seat and door mirrors
The remote control transmitter also controls the position of the power driver's
seat and door mirrors in the following way:
1. Adjust the seat to your preferences.
2. When you leave your veh ...
Rear fog light
The single rear fog light is located in the driver's side taillight cluster.
The rear fog light will only function in combination with the high/low beam headlights.
Press the button to switch ...
Avoiding collision and rollover
WARNING:
Failure to operate this vehicle in a safe and prudent manner may result in loss
of control or an accident.
Be alert and drive defensively at all times. Obey all traffic regulations. Avoid ...