BMW 5 Series: Fold-out position of the wipers
Required when changing the wiper blades or under frosty conditions, for example.
1. Switch off the ignition.
2. Under frosty conditions, ensure that the
wiper blades are not frozen onto the windshield.
3. Press the wiper lever up beyond the point of
resistance and hold it for approx. 3 seconds,
until the wiper remains in a nearly vertical
position.
After the wipers are folded back down, the wiper system must be reactivated.
Fold the wipers back down
Before switching the ignition on, fold the
wipers back down to the windshield; otherwise,
the wipers may become damaged when they are
switched on.◀
1. Switch on the ignition.
2. Press the wiper levers down. The wipers
move to their resting position and are ready
for operation.
Windshield washer nozzles
The washer jets are automatically heated whenever
the ignition is switched on.
...
Washer fluid
...
See also:
System servicing
WARNING
● When discarding a seatbelt retractor assembly or scrapping the entire vehicle
damaged by a collision, consult your SUBARU dealer.
● Tampering with or disconnecting the system ...
Traction Grades
The Traction grades, from highest to lowest, are AA, A, B,
and C. These grades represent the tire’s ability to stop on
wet pavement, as measured under controlled conditions
on specified govern ...
Volume Control
VOL/ (Volume/Power): Turn to
adjust the volume.
(Phone/Mute): For vehicles with
OnStar®, press and hold to mute
the infotainment system. Press and
hold again, or turn the VOL/
knob t ...