Mercedes-Benz E-Class: Folding out the folding bench seat
•► Make sure that the backrests of the rear bench seat are locked in the upright position.
•► Move the handle for the combined cargo cover and net upwards.
•► Pull release handle 1 and fold the backrest of the folding bench seat upwards.
•► Hook the seat belts into retainers 3.
•► Pull release handle 2 and fold the folding bench seat cushion into the sitting position.
•► Push down the seat cushion until the backrest engages fully.
•► Fold the head restraints upwards.
Important safety notes
The folding bench seat in the cargo compartment is only approved for people with a height no greater than 4.6 ft(1.40 m) and max. 110 lb(50 kg) body weight. The maximum permissible weight avail ...installing and removing the seat cushion
You must remove the seat cushion if you wish to lift the trunk floor, e.g. if the vehicle has a flat tire. •► To remove: fold seat cushion 2 upwards and remove it from seat cushion ...See also:
Changing the engine oil and filter
...
Protecting Exterior Bright Metal Parts
Bright metal parts should be cleaned regularly to keep their luster. Wash with water or use chrome polish on chrome or stainless steel trim, if necessary.
Use special care with aluminum trim. To avoi ...
115 V power socket
WARNING
The 115V AC socket operates at high voltage.
Use the 115V AC socket in the vehicle with
the same caution and prudence that you
exercise when using power outlets at home.
Keep any fl ...