Subaru Legacy: Front position light - Replacing bulbs - Maintenance and service - Subaru Legacy Owners ManualSubaru Legacy: Front position light

1. Turn the socket counterclockwise and pull it out.

1. Turn the socket counterclockwise and pull it out.

2. Pull out the bulb from the socket and replace the bulb with a new one.

    Front turn signal light
    NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. 1. Turn over the protective cover of the engine compartment. 2 ...

    Front fog light (if equipped)
    NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. 1. Pull off the fender lining. Refer to “Pulling off the fender l ...

    See also:

    Theft-Deterrent System
    If the theft deterrent system detects an inappropriate entry into the vehicle, which could result in the vehicle or its contents being stolen, the alarm alerts the surrounding area of an abnormali ...

    Driving Safely With a Trailer
    The added weight, length, and height of a trailer will affect your vehicle’s handling and performance, so driving with a trailer requires some special driving skills and techniques. For y ...

    Most common factors contributing to vehicle corrosion
    ● The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ● Damage to paint and other protective coatings caused by gravel and stone c ...