Subaru Legacy: Gross Vehicle Weight (GVW) and Gross Vehicle Weight Rating (GVWR) - Maximum load limits - Trailer towing - Driving tips - Subaru Legacy Owners ManualSubaru Legacy: Gross Vehicle Weight (GVW) and Gross Vehicle Weight Rating (GVWR)

Gross Vehicle Weight

Gross Vehicle Weight

The Gross Vehicle Weight (GVW) must never exceed the Gross Vehicle Weight Rating (GVWR).

Gross Vehicle Weight (GVW) is the combined total of the weight of the vehicle, driver, passengers, luggage, trailer hitch, trailer tongue load and any other optional equipment installed on your vehicle. Therefore, the GVW changes depending on the situation. Determine the GVW each time before going on a trip by putting your vehicle and trailer on a vehicle scale. GVWR is shown on the certification label located on the driver’s door of your vehicle.

Certification label

Certification label

    Total trailer weight
    Total trailer weight The total trailer weight (trailer weight plus its cargo load) must never exceed the maximum weight. Legacy The total trailer weight must not exceed 1,000 lbs (453 kg). Out ...

    Gross Axle Weight (GAW) and Gross Axle Weight Rating (GAWR)
    Gross Axle Weight The total weight applied to each axle (GAW) must never exceed the Gross Axle Weight Rating (GAWR). The front and rear GAWs can be adjusted by relocating passengers and luggage ...

    See also:

    Examples of the types of accidents in which the SRS curtain airbag is unlikely to deploy.
    Legacy models 1) The vehicle is involved in an oblique side-on impact. 2) The vehicle is involved in a side-on impact in an area outside the vicinity of the passenger compartment. 3) The vehicl ...

    Important features in the engine compartment
    Important features in the engine compartment 1. Vehicle identification number 2. Jump-starting, negative terminal 3. Washer fluid reservoir 4. Jump-starting, positive terminal 5. Oil filler nec ...

    Reducing Speed While Using Cruise Control
    If the cruise control system is already activated: • Move the thumbwheel toward SET/− and hold until the desired lower speed is reached, then release it. • To slow down in small am ...