Chrysler 200: Headlights And Parking Lights
Turn the end of the multifunction lever to the first detent for parking light operation. Turn to the second detent for headlight operation.
Headlight Switch
Multifunction Lever
The multifunction lever controls the operation of the parking lights, headlights, headlight beam selection, passing light, fog lights, instrument panel light dimming and turn signals. The multif ...Automatic Headlights — If Equipped
Turning the end of the multifunction lever to the third detent (AUTO), will activate the automatic headlight system. Headlight Switch With the engine running and the multifunction lever in t ...See also:
Brake/Clutch Fluid
Inspecting Brake/Clutch Fluid Level
The brakes and clutch draw fluid from the same reservoir.
Inspect the fluid level in the reservoir regularly. It should be kept at MAX.
The level normally drops ...
When the System Does Not
Seem to Work Properly
The following messages may be
displayed on the DIC:
SERVICE PARK ASSIST: If this
message occurs, take the vehicle to
your dealer to repair the system.
PARK ASSIST OFF: If the URPA
system doe ...
Wheel Replacement
Replace any wheel that is bent,
cracked, or badly rusted or
corroded. If wheel nuts keep coming
loose, the wheel, wheel bolts, and
wheel nuts should be replaced.
If the wheel leaks air, repla ...