Chrysler 200: Headlights With Wipers Feature (Available With Automatic Headlights Only)
When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever (on the left side of the steering column) is placed in the AUTO position. In addition, the headlights will turn off when the wipers are turned off if they were turned on by this feature.
The headlights with wipers feature can be turned on or off through the Electronic Vehicle Information Center (EVIC) — if equipped. Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Features)” in “Understanding Your Instrument Panel” for further information.
Mist Feature
Push down on the wiper control lever to activate a single
wipe to clear the windshield of road mist or spray from
a passing vehicle. As long as the lever is held down, the
wipers will continue t ...
Tilt/Telescoping Steering Column
This feature allows you to tilt the steering column
upward or downward. It also allows you to lengthen or
shorten the steering column. The tilt/telescoping lever is
located below the steering wh ...
See also:
Tire pressure of 180 kPa (1.8 bar/
26 psi) is reached
•► Press the on/off switch on the tire inflation
compressor to 0.
The tire inflation compressor is switched
off.
•► Unscrew the filler hose from the valve of
the faulty tire.
...
Body Lubrication
All moving points of the body, such as door and hood hinges and locks, should
be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on
locks during cold weather.
Make sur ...
Cleaning
Keeping the windshield and wiper blades clean helps improve visibility and prolongs
the service life of the wiper blades. Clean the wiper blades with a stiff-bristle
brush and lukewarm soap soluti ...
