Subaru Legacy: Heater operation - Manual climate control system (if equipped) - Climate control - Subaru Legacy Owners ManualSubaru Legacy: Heater operation

NOTE

● When the “button is pressed the air conditioner compressor automatically operates to quickly” button or “button is pressed the air conditioner compressor automatically operates to quickly” button is pressed the air conditioner compressor automatically operates to quickly defog the windshield. However the indicator on the air conditioner button will not illuminate. At the same time, the air inlet selection is automatically set to “outside air” mode.

● Warm air also comes out from the right and left air outlets. To stop warm airflow from these outlets, turn the corresponding wheel to the “position.” position.

Air inlet selection button
ON position (recirculation): Interior air is recirculated inside the vehicle. Press the air inlet button to the ON position. The indicator light will illuminate. Place this button in the ON posit ...

Defrosting or defogging the windshield
To direct warm air to the windshield and front door windows: 1. Set the air inlet selection button to the OFF position. 2. Press the “” button. 3. Turn the temperature control dial all the way ...

See also:

Automatic tailgate operation
Opening The trunk lid opens fully. ▷ Press the button on the exterior of the trunk lid. ▷ Press the button on the remote control for approx. 1 second. ▷ Push the button ...

Engine Oil
NOTE: Changing the engine oil should be done by an Authorized Mazda Dealer. Recommended Oil Use SAE 5W-20 engine oil. Oil container labels provide important information. A chief contribution this ...

Engine Oil Change
When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter changed within the next 1 000 km/600 mi. If driven under the best conditions, the engine oil life system migh ...