Volvo S60: High beam, Halogen - Introduction - Maintenance and specifications - Volvo S60 Owners ManualVolvo S60: High beam, Halogen

1. Remove the headlight housing from the vehicle (see page 306).

1. Remove the headlight housing from the vehicle (see page 306).

2. Remove the cover over the bulbs (see page 308).

3. Remove the bulb by turning it counterclockwise and pulling it straight out.

4. Remove the connector from the bulb.

5. Press the new bulb into the socket and turn it clockwise to put it in place. It can only be secured in one position.

6. Reinsert the bulb holder into the headlight housing.

7. Put the cover back into position and reinstall the headlight housing.

    Low beam, Halogen
    1. Remove the headlight housing from the vehicle (see page 306). 2. Remove the cover over the bulbs (see page 308). 3. Unplug the connector from the bulb. 4. Remove the bulb by pulling it straigh ...

    Extra high beam
    1. Remove the headlight housing from the vehicle (see page 306). 2. Remove the cover over the bulbs (see page 308). 3. Remove the bulb by turning it counterclockwise and pulling it straight out. ...

    See also:

    All around the headliner
    All around the headliner 1. Emergency Request 2. Glass sunroof, powered 3. Indicator lamp, front passenger airbag 4. Reading lamps 5. Interior lamps ...

    Receiving a Call
    When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on. Press the HFL Talk button to answer the call, or the HFL Back butto ...

    Pulling off the fender lining
    It is necessary to pull off the fender lining when replacing some bulbs. 1. Start the engine and turn the steering wheel fully in the opposite direction of the bulb to be replaced. 2. Stop the eng ...