Mercedes-Benz E-Class: High-beam headlamps
•► To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
•► Turn the light switch to 
or 
.
•► Press the combination switch beyond the pressure point in the direction of arrow 1.
In the position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The 
indicator lamp in the
instrument
cluster lights up when the high-beam
headlamps are switched on.
•► To switch off the high-beam headlamps: move the combination switch back to its normal position.
The 
indicator lamp in the
instrument
cluster goes out.
Turn signals
1. High-beam headlamps
2. Right turn signal
3. High-beam flasher
4. Left turn signal
•► To indicate briefly: press the combination
switch briefly to the pressure point in the ...
High-beam flasher
•► To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
•► Pull the combination switch in the direction
of arrow 3. ...
See also:
Parking assistant
The concept
This system assists the driver in parking parallel
to the road.
Ultrasound sensors measure parking spaces on
both sides of the vehicle.
The parking assistant calculates the best p ...
Security feature
If a door is not opened within approximately 60 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again. ...
Finish Damage
Quickly repair minor chips and
scratches with touch-up materials
available from your dealer to avoid
corrosion. Larger areas of finish
damage can be corrected in your
dealer's body and paint ...
