Volvo S60: High/low beam headlights
Continuous high beams
1. Set the ignition to mode II.
2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high and low beams (this also applies on models equipped with the optional Active Bending Lights). > The symbol illuminates in the instrument panel to indicate that the high beams are on.
Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or .
Daytime running lights can be deactivated in the MY CAR menu system under Settings - Car settings - Light settings - Daytime running lights.
However, please be aware that these lights may not be deactivated in Canada.
NOTE
- The use of daytime running lights is mandatory in Canada.
- Continuous high beams cannot be activated when the headlight switch is in position . High beam flash will function in this position.
High/low beam headlights
Headlight switch and lever 1 - High beam flash 2 - Toggle between high and low beams High beam flash Move the lever toward the steering wheel to position 1. The high beams come on until the ...Active Bending Lights (ABL)*
Headlight pattern with the Active Bending Light function deactivated (left) and activated (right) When this function is activated, the headlight beams adjust laterally to help light up a curve ...See also:
CD/Multimedia
CD/DVD drive
Music collection
External devices
Tone
Telephone
Office
Contacts
BMW Assist or ConnectedDrive
...
Driving on snowy and icy roads
WARNING
Do not use the cruise control on slippery roads such as snowy or icy roads. This
may cause loss of vehicle control.
CAUTION
Avoid prolonged continuous driving in snowstorms. Snow will ent ...
Emission control system
The emission control system of your vehicle is covered by a written limited warranty.
Please see the warranty information contained in the Owner’s Handbook & Warranty
Information booklet in ...