Subaru Legacy: Hill Holder indicator light - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Hill Holder indicator light

WARNING

WARNING

If the Hill Holder indicator light does not illuminate even when the Hill Holder switch is pressed to activate the Hill Holder function, the electronic parking brake system may be malfunctioning. Immediately stop the vehicle in a safe location and contact your SUBARU dealer.

The light illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds.

The light illuminates when the Hill Holder switch is pressed to activate the Hill Holder function.

    Electronic parking brake system warning
    The brake system warning light flashes when the electronic parking brake system is malfunctioning. If the warning light flashes, promptly park in a safe location as soon as possible and contact yo ...

    Low fuel warning light
    The low fuel warning light illuminates when the tank is nearly empty approximately 2.6 US gal (10.0 liters, or 2.2 Imp gal). It only operates when the ignition switch is in the “ON” position ...

    See also:

    Cleaning the rear view camera
    Example: Sedan •► Use clear water and a soft cloth to clean camera lens 1. Do not clean the camera lens and the area around the rear view camera with a power washer. ...

    Pre-heating or pre-cooling the interior of the vehicle
    Models with automatic climate control system: After the system starts the engine, the automatic climate control system will activate the “FULL AUTO” mode and heat or cool the interior to the pr ...

    Erasing warning messages
    When a low tire pressure warning message has been displayed, and the tire pressure warning light has come on: 1. Use a tire pressure gauge to check the inflation pressure of all four tires. 2. Re- ...