Chrysler 200: If Engine Fails To Start
WARNING!
• Never pour fuel or other flammable liquids into
the throttle body air inlet opening in an attempt to
start the vehicle. This could result in a flash fire
causing serious personal injury.
• Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic transmission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery, booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly. Refer to “Jump Starting” in “What To Do In Emergencies” for further information.
Extreme Cold Weather (Below –20°F Or 29°C)
To ensure reliable starting at these temperatures, use of
an externally powered electric engine block heater (available
from your dealer) is recommended. ...
Without Tip Start
If the engine fails to start after you have followed the
“Normal Starting” or “Extreme Cold Weather” procedures,
it may be flooded. Push the accelerator pedal all
the way to the floor an ...
See also:
Brake fluid
Checking the brake fluid level
Check the fluid level in the reservoir periodically.
The fluid level should be between MAX and MIN marks on the side of the reservoir.
Before removing the reservoir ...
Entering a Character Sequence
1. Turn the Menu knob to highlight
the character.
2. Press SELECT to select the
character.
Press the BACK button to
delete
the last character in the sequence
or press and hold to delete ...
Air Vents
Use the louvers located on the air vents to change the direction of the airflow.
To open a vent, move the thumbwheel to | . To close the vent, move the thumbwheel to .
Operation Tips
► Keep a ...
