Toyota Camry: If the shift lever cannot be shifted from P
If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately.
The following steps may be used as an emergency measure to ensure that the shift lever can be shifted:
- Set the parking brake.
- Vehicles without a smart key system: Turn the engine
switch to the “ACC” position.
Vehicles with a smart key system: Turn the “ENGINE START STOP” switch to ACCESSORY mode. - Depress the brake pedal.
Pry the cover up with a flathead screwdriver or equivalent.
Press the shift lock override button.
The shift lever can be shifted while the button is pressed.
Emergency start function (vehicles with a smart key system)
When the engine does not start, the following steps can be used as an interim measure to start the engine if the “ENGINE START STOP” switch is functioning normally: Set the parking brake. ...If you lose your keys
New genuine keys can be made by your Toyota dealer. For vehicles without the smart key system, bring a master key and the key number stamped on the key number plate. For vehicles with the smart ...See also:
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the button until you hear a
single beep,
indicating that the active and hold status of the two calls
have switched. Only one c ...
Connecting cell phones
The procedure for connecting a cell phone varies, depending on the phone itself
and on whether or not the phone has been previously paired with the infotainment
system (see page 230 for instructio ...
Dehumidified defrosting or defogging
1. Press the defroster control button
to
turn the system on. The indicator light in the
button will illuminate.
2. Turn the temperature dial to the left or right
to set the desired temperature.
...