Chrysler 200: Ignition Key Removal - A Word About Your Keys - Things to know before starting your vehicle - Chrysler 200 Owners ManualChrysler 200: Ignition Key Removal

Vehicle Key
Vehicle Key

Automatic Transaxle

Place the shift lever in PARK. Turn the ignition switch to the ACC position, push the key and cylinder inward, rotate the key to the LOCK position, and remove the key.

Ignition Switch Positions
Ignition Switch Positions

1 — LOCK
2 — ACC (ACCESSORY)
3 — ON/RUN
4 — START

NOTE:
• If you try to remove the key before you place the shift lever in PARK, the key may become trapped temporarily in the ignition switch lock cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to warn you that this safety feature is inoperable.

The engine can be started and stopped, but the key cannot be removed until you obtain service.

• For vehicles not equipped with the Electronic Vehicle Information Center (EVIC), the power window switches, radio, hands–free system (if equipped), and power outlets will remain active for 45 seconds after the ignition switch is turned to the LOCK position.

Opening either door will cancel this feature.

• For vehicles equipped with the Electronic Vehicle Information Center (EVIC), the power window switches, radio, hands–free system (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position.

Opening either front door will cancel this feature.

The time for this feature is programmable. Refer to “Electronic Vehicle Information Center (EVIC)/ Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.

WARNING!
• Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the key fob from the ignition. When leaving the vehicle, always lock your vehicle.

• Never leave children alone in a vehicle, or with access to an unlocked vehicle.

• Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever.

• Do not leave the key fob in or near the vehicle, and do not leave the ignition in the ACC or ON/RUN position. A child could operate power windows, other controls, or move the vehicle.

CAUTION!
An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors when leaving the vehicle unattended.

    A Word About Your Keys
    The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your authorized dealer. Ask your authoriz ...

    Key-In-Ignition Reminder
    Opening the driver’s door when the key is in the ignition sounds a signal to remind you to remove the key. NOTE: • The Key-In-Ignition reminder only sounds when the ignition key is placed in ...

    See also:

    To Use the Engine Coolant Heater
    1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. 3.6L V6 Engine The electrical cord is located on the driver side of the engine compartment, between the fender and ...

    Recording from Audio CDs
    The infotainment system can record the current song playing or all songs from an audio CD to MEM. A status bar appears on the top of the display when the recording process starts and disappe ...

    Flexible fuel (2.7L ONLY) — if equipped
    E85 General Information The information in this section is for Flexible Fuel vehiclesonly. These vehicles can be identified by a uniquefuel filler door label that states Ethanol (E85) or Unleaded ...