Subaru Legacy: Immobilizer system - Security indicator light - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Immobilizer system

This light blinks approximately 60 seconds after the ignition switch is turned from “ON” position to the “Acc” or “LOCK” position or immediately after the key is pulled out. Refer to “Immobilizer” F2-3. If the indicator light does not flash, it may indicate that immobilizer system may be malfunctioning. Contact your nearest SUBARU dealer immediately. In the event that an unauthorized key (for example, an unauthorized duplicate) is used, the security indicator light illuminates.

    Alarm system
    It blinks to show the driver the operational status of the alarm system. For detailed information, refer to “Alarm system” F2- 15. ...

    Select lever/gear position indicator
    1) Upshift/downshift indicator (AT and CVT models) This indicator shows the position of the shift lever (MT models) or select lever (AT and CVT models). ...

    See also:

    Coolant Level
    Four-Cylinder Engines – the coolant bottle provides a quick visual method for determining that the engine coolant (antifreeze) level is adequate. With the engine idling and warm to normal oper ...

    Warning/Indicator Lights
    Signal Warning/Indicator Lights Brake System Warning Light Charging System Warning Light Engine Oil Pressure Warning Light Check Engine ...

    Maintenance-Free Battery
    Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic maintenance required. NOTE: The battery is stored in a compartment behind the left fr ...