Toyota Camry: Inspection and adjustment procedure
- Tire valve
- Tire pressure gauge
- Remove the tire valve cap.
- Press the tip of the tire pressure gauge onto the tire valve.
- Read the pressure using the gauge gradations.
- If the tire inflation pressure is not at the recommended
level, adjust the pressure.
If you add too much air, press the center of the valve to deflate. - After completing the tire inflation pressure measurement and adjustment, apply soapy water to the valve and check for leakage.
- Put the tire valve cap back on.
Tire inflation pressure
The recommended cold tire inflation pressure and tire size are
displayed on the tire and loading information label.
...
Tire inflation pressure check interval
You should check tire inflation pressure every two weeks, or at least
once a month.
Do not forget to check the spare. ...
See also:
Exhaust pipe and muffler
Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration,
or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten
connections or replace part ...
Summer tires
- Optionally, tires with a maximum speed of
over 149 mph (240 km/h) may have "ZR"
in the size description depending on the
manufacturer (e.g. 245/40 ZR 18).
The service specif ...
Audio unit commands
CD Player/CD Changer
You can choose a disc or track directlyby voice control.
Overview
The overview below shows the availablevoice commands for operating your CDplayer. The following lists will giv ...
