Toyota Camry: Installing child restraints
Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint.
The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system.
Child restraint LATCH anchors
LATCH anchors are provided for the outer rear seats. (Buttons displaying the location of the anchors are attached to the seats.)
Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver’s seat belt)
Anchor brackets (for top tether
strap)
An anchor bracket is provided for each rear seat.
- Installation with LATCH system
- Installing child restraints using a seat belt (child restraint lock function belt)
- Removing a child restraint installed with a seat belt
- Child restraint systems with a top tether strap
Types of child restraints
Child restraint systems are classified into the following 3 types
according to the age and size of the child:
Rear facing ⎯ Infant seat/convertible seat
Forward facing ⎯ Convertibl ...
Installation with LATCH system
Type A
Widen the gap between the seat
cushion and seatback
slightly.
Latch the hooks of the lower
straps onto the LATCH anchors.
If the child restraint has a top
tether strap, the top te ...
See also:
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
WARNING
A malfunction in the system has been
detected if one of the following conditions
occurs:
- ...
COOLANT LEVEL LOW ADD
COOLANT
This message will display if the
coolant is low. See Engine Coolant. ...
For AT models
This light flashes if the vehicle is driven with tires of different diameters
fitted on its wheels or with the air pressure excessively low in any of its tires. ...
