Nissan Altima: Installing covers to rear parcel shelf
CAUTION
Make sure that the hinge is completely aligned with the pin. If the pin is forced into position, it may break.
Install the top tether anchor cover or key cylinder cover as follows:
1. With the pin on one end kept free of its hinge 1 , align the pin of the other end and slide it into the hinge 2 .
2. With the first pin in position 2 , align the second pin with its hinge slot 1 and push down on the cover to completely engage it. A snap sound will be heard.
3. Close the cover.
Removing covers from rear parcel shelf
Remove the top tether anchor cover or key cylinder cover as follows: 1. Lift the cover to the full open position. 2. Rotate the cover in the direction shown, disengaging the hinge at 1 and sli ...Wheels and tires
If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. ...See also:
Compass Messages
CAL
This message is displayed when the compass needs to be calibrated.
See Compass .
– – – Three dashes will be displayed if the compass needs service. See your dealer for service. ...
F.M.V.S.S./C.M.V.S.S. certification label
The Federal/Canadian Motor Vehicle Safety
Standard (F.M.V.S.S./C.M.V.S.S.) certification label
is affixed as shown. This label contains valuable
vehicle information, such as: Gross Vehicle
Weigh ...
Head Restraints
Your vehicle is equipped with head
restraints in all seating positions to
help protect you and your
passengers from the likelihood of
whiplash and other injuries.
They are most effective wh ...