Mercedes-Benz E-Class: Installing/removing the towing eye
Installing the towing eye
•► Remove the towing eye from the vehicle tool kit
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Example: Sedan
•► Press the mark on cover 1 inwards in the direction of the arrow.
•► Take cover 1 off the opening.
•► Screw the towing eye in clockwise to the stop and tighten it.
Removing the towing eye
•► Loosen the towing eye and unscrew it.
•► Attach cover 1 to the bumper and press until it engages.
•► Place the towing eye in the vehicle tool kit.
Important safety notes
WARNING If you tow the vehicle, you must use a rigid towing bar if: - the engine is not running. - there is a brake system malfunction. - there is a malfunction in ...Towing the vehicle with the rear axle raised
Only possible on vehicles without 4MATIC. When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions The ignition must be switched off if you ...See also:
Lane Change Assist
Tap the lever up or down once, without moving beyond
the detent, and the turn signal (right or left) will flash
three times then automatically turn off. ...
To Stop Playing a Disc
To take the system out of disc mode,
press the FM/AM button, the
button, or the AUX button (if
an appropriate unit is connected). To
return to disc mode, press the CD
button.
You can also ...
Auto Unlock On Exit
The doors will unlock automatically on vehicles with
power door locks if:
1. The Automatic Unlock Doors On Exit feature is enabled.
2. The transmission was in gear and the vehicle speed
returned ...