Nissan Altima: Installing top tether strap
First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable.
1. Flip up the anchor cover 1 from the anchor
point which is located directly behind the
child seat.
2. Position the top tether strap over the top of
the seatback 2 .>
3. Secure the tether strap to the tether anchor
point on the rear parcel shelf 3 .>
4. Refer to the appropriate child restraint installation
procedure steps in this section
before tightening the tether strap.
To remove or reinstall the tether anchor covers, see “Upper tether anchor/key cylinder covers” in the “Maintenance and do-it-yourself” section of this manual.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
Forward-facing child restraint installation
using the seat belts
WARNING
The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure to
use the ALR mode will result in the child
restraint not being p ...
Booster seats
...
See also:
Keys
WARNING:
Do not leave the key in your vehicle with children and keep them in a place where
your children will not find or play with them:
Leaving children in a vehicle with the key is dangerous. T ...
Gasoline containing oxygenates
Some fuel suppliers sell gasoline containing oxygenates
such as ethanol, MTBE and methanol
with or without advertising their presence.
NISSAN does not recommend the use of fuels of
which the oxyge ...
Vehicle certification label
Vehicle certification
label
The vehicle certification label attached on the driver’s side center pillar gives
the vehicle identification number (VIN). ...
