Nissan Maxima: Installing top tether strap
INSTALLING TOP
TETHER STRAP
First, secure the child restraint with the Latch lower anchors (rear outboard seat positions only) or the seat belt, as applicable.
1. Flip up the anchor covers from the anchor point which is located directly behind the child seat.
2. Position the top tether strap over the top of the seatback.
3. Secure the tether strap to the tether anchor point on the rear parcel shelf.
4. Tighten the tether strap according to the manufacturers instructions to remove any slack.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
Forward-facing child restraint installation using the seat belts
WARNING:
The three-point seat belt with Automatic Locking Retractor (ALR) must be used
when installing a child restraint. Failure to use the ALR mode will result in the
child restraint not being ...
Booster seats
Precautions on booster seats
WARNING:
If a booster seat and seat belt are not used properly, the risk of a child being
injured in a sudden stop or collision greatly increases:
Make sure the shoul ...
See also:
Backing up on a steep uphill
When backing up the vehicle up a hill, the distance
guide lines and the vehicle width guide
lines are shown closer than the actual distance.
For example, the display shows 3 ft (1.0 m) to the
pl ...
In the event of a collision
Unfortunately, accidents do occur. In this unlikely event, there is some important
information you should know.
Many insurance companies routinely authorize the use of non-genuine collision
parts ...
Lumbar Adjustment
To adjust the lumbar support:
► Press and hold the front or rear of the control to increase or decrease lumbar support.
► Press and hold the top or bottom of the control to raise or lo ...
