Mercedes-Benz E-Class: Instrument cluster - Settings menu - Menus and submenus - On-board computer and displays - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Instrument cluster

Selecting the unit of measurement for distance

The Display Unit Speed-/Odometer:

function allows you to choose whether certain displays appear in kilometers or miles.

The selected unit of measurement for distance applies to:

 - the digital speedometer in the Trip menu
 - the odometer and the trip odometer
 - the trip computer
 - the current consumption and the range
 - the navigation instruction in the Navi menu
 - DISTRONIC PLUS
 - ASSYST PLUS service interval display

•► Press the steering wheel to select the Settings button on the steering wheel to select the Settings menu.

•► Press the Instr. cluster submenu. button to select the Instr. cluster submenu.

•► Press the a button to confirm.

•► Press the Display Unit Speed-/Odometer function. button to select the Display Unit Speed-/Odometer function.

You will see the selected setting: km or miles.

•► Press the setting. button to save the setting.

Selecting the permanent display function

The Permanent Display: function allows you to choose whether the multifunction display always shows the outside temperature or the speed in km/h (USA) or mph (Canada).

•► Press the steering wheel to select the Settings button on the steering wheel to select the Settings menu.

•► Press the Instr. cluster submenu. button to select the Instr. cluster submenu.

•► Press the •► Press the button to select the button to confirm.

•► Press the Permanent display function. button to select the Permanent display function.

You will see the selected setting Outside Temperature or Speedometer [km/h]:.

•► Press thesetting. button to save the setting.

    Introduction
    The Sett. menu can be used for:  - changing the instrument cluster settings  - changing the light settings  - changing the vehicle settings  - changing the convenien ...

    Lights
    Switching the daytime running lamps on/ off This function is not available in Canada. If you have activated the Day Lights function and the light switch is in the or position, the daytime r ...

    See also:

    Engine Block Heater — If Equipped
    The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded, three-wire extension cord. ...

    Seat belts
    The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in th ...

    Preparing to Drive
    You should do the following checks and adjustments before you drive your vehicle. 1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ic ...