Chrysler 200: Instrument Cluster Messages - Gear Ranges - Automatic Transmission - Starting and operating - Chrysler 200 Owners ManualChrysler 200: Instrument Cluster Messages

Messages will be displayed in the instrument cluster to alert the driver when certain unusual conditions occur.

These messages are described below.

Transmission Limp Home Mode

    DRIVE
    This range should be used for most city and highway driving. It provides the smoothest upshifts and downshifts, and the best fuel economy. The transmission automatically upshifts through all for ...

    Transmission Limp Home Mode
    Transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home Mode is activated. In this ...

    See also:

    Fog Lights — If Equipped
    The front fog light switch is on the multifunction lever. To activate the front fog lights, turn on the parking lights or the low beam headlights and pull out the end of the multifunction leve ...

    Safety belt reminder for the driver's and front passenger seat
    The indicator lamp flashes or lights up and a signal sounds. Make sure that the safety belts are positioned correctly. The safety belt reminder is active at speeds above approx. 5 mph/8 km/h ...

    Engine Drive Belt Routing
    2.4L L4 Engine Belt removal and installation requires special tools. See your dealer for service. 3.6L V6 Engine ...