Ford Fusion: Interior lamps - Lighting - Ford Fusion Owners manualFord Fusion: Interior lamps

Off ADoor contact BOn C

Courtesy lampOff ADoor contact BOn C

If you set the switch to position B, thecourtesy lamp will come on when youunlock or open a door or the tailgate. Ifyou leave a door open with the ignitionswitch off, the courtesy lamp will go offautomatically after some time to preventthe vehicle battery from discharging. Toswitch it back on, switch on the ignitionfor a short time.

Off ADoor contact BOn C

If you set the switch to position B, thecourtesy lamp will come on when youunlock or open a door or the tailgate. Ifyou leave a door open with the ignitionswitch off, the courtesy lamp will go offautomatically after some time to preventthe vehicle battery from discharging. Toswitch it back on, switch on the ignitionfor a short time.

The courtesy lamp will also come on whenyou switch off the ignition. It will go offautomatically after a short time or whenyou start or restart the engine.

If you set the switch to position C with theignition switch off, the courtesy lamp willcome on. It will go off automatically aftera short time to prevent the vehicle batteryfrom discharging. To switch it back on,switch on the ignition for a short time.

Off AOn B

Reading lamps

Removing a headlamp

Off AOn B

    Direction indicators
    Direction indicators Briefly tap the lever up or down and thedirection indicators will flash three times. ...

    Removing a headlamp
    1. Open the bonnet. See Opening andclosing the bonnet. 2. Remove the screws. CAUTION: Do not pull the bumper more than 10mm from its original position. 3. Carefully pull the bumper towards the ...

    See also:

    Cleaning ventilator grille
    Always keep the front ventilator inlet grille free of snow, leaves, or other obstructions to ensure efficient heating and defrosting. Since the condenser is located in front of the radiator, thi ...

    Removal and Installation of the Sealant Canister
    To remove the sealant canister: 1. Unwrap the sealant hose. 2. Press the canister release button. 3. Pull up and remove the canister. 4. Replace with a new canister which is available from you ...

    Selecting a Memorized Position
    To select a memorized position, do this: 1. Make sure the parking brake is set and the shift lever is in Park (automatic). 2. Press the desired memory button (1 or 2) until you hear a beep ...