Nissan Altima: Interior light - Instruments and controls - Nissan Altima Owners ManualNissan Altima: Interior light

Type A

Type A

The interior light has a three-position switch and operates regardless of ignition switch position.

● When the switch is in the ON position 1 , the interior light illuminates, regardless of door position. The light will go off after 15 minutes unless the ignition switch is placed in the ON position.

● When the switch is in the center DOOR position 2 , the front and rear personal lights will illuminate when the driver’s door is opened. Lights remain on for a maximum of 30 seconds after driver’s door is closed.

Type B

Type B

The lights will go off when the ignition switch is placed in the ON position, or the driver’s door is closed and locked.

The lights will also go off after 15 minutes when the doors are open.

● When the switch is in the OFF position 3 , the interior light does not illuminate, regardless of door position.

NOTE:

The doorstep lights illuminate when the driver and passenger doors are opened regardless of the interior light switch position. These lights will turn off automatically after 15 minutes while doors are open to prevent the battery from becoming discharged.

CAUTION

Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.

If the moonroof does not close
Have your NISSAN dealer check and repair the moonroof. ...

Console light (if so equipped)
The console light will turn on whenever the parking lights or headlights are illuminated. The console light brightness can be adjusted with the instrument brightness control. ...

See also:

Passenger’s frontal airbag ON and OFF indicators
The front passenger’s frontal airbag ON and OFF indicators show you the status of the front passenger’s SRS frontal airbag. The indicators are located next to the clock in the center porti ...

Brake system
The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at 2 wheels. ...

Select lever/gear position indicator
1) Upshift/downshift indicator (AT and CVT models) This indicator shows the position of the shift lever (MT models) or select lever (AT and CVT models). ...