Mazda Mazda6: Interior Lights - Interior Comfort - Mazda6 Owners ManualMazda Mazda6: Interior Lights

Illuminated Entry System

When the illuminated entry system operates, the overhead light (switch is in the DOOR position), the courtesy lights and the ground illumination light turn on for:

- About 30 seconds after the driver's door is unlocked and the ignition key is removed (without advanced key) or the ignition is switched off (with advanced key).

- About 15 seconds after all doors are closed.

(With Advanced key).

About 5 seconds after all doors when the advanced key is outside of the vehicle.

- About 15 seconds after the ignition is switched off (LOCK) and the ignition key removed (without advanced key) with all doors closed.

The light also turns off when:

- The ignition is switched on and all doors are closed.

- The driver's door is locked.

NOTE:

- Battery saver.

If any door is left opened, the light turns off after about 30 minutes to save the battery.

The light turns on again when the ignition is switched on, or when any door is opened after all doors have been closed.

- The operation of the illuminated entry system can be changed.

Refer to Personalization Features.

Overhead Lights

Rear Front

Rear

Map Lights

Map Lights

The map lights are switched on or off by pressing the switches.

The map lights are switched on or off by pressing the switches.

Courtesy Lights

Turns on when any door is open or the illuminated entry system is on.

Turns on when any door is open or the illuminated entry system is on.

    Sunvisors
    When you need a sunvisor, lower it for use in front or swing it to the side. Side Extension Sunvisors The visor extender extends the sunvisor's range of sun shading. To use, pull it out. C ...

    Information Display
    Information Display Functions The information display has the following functions: - Clock. - Climate Control Display (Fully Automatic Type Air Conditioning System). - Audio Display. - Trip Com ...

    See also:

    Specifications
    Engine Electrical System *1 ex factory CAUTION: When cleaning the iridium plugs, do not use a wire brush. (2.5-liter engine) The fine particulate coating on the iridium alloy and platinum t ...

    Air intake control
    This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator lig ...

    Temperature Gauge
    This shows the temperature of the engine’s coolant. During normal operation, the pointer should rise from the bottom mark to about the middle of the gauge. In severe driving conditions, su ...