Toyota Camry: Key reminder function - Engine (ignition) switch (vehicles without a smart key system) - Driving procedures - When driving - Toyota Camry Owners ManualToyota Camry: Key reminder function

A buzzer sounds if the driver’s door is opened while the engine switch is in the “LOCK” or “ACC” position to remind you to remove the key.

CAUTION
■When starting the engine
Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances.
Doing so may cause an accident resulting in death or serious injury.
■Caution when driving
Do not turn the engine switch to the “LOCK” position while driving. If, in an emergency, you must turn the engine off while the vehicle is moving, turn the engine switch only to the “ACC” position to stop the engine. An accident may result if the engine is stopped while driving.

NOTICE
■To prevent battery discharge
Do not leave the engine switch in the “ACC” or “ON” position for long periods of time without the engine running.
■When starting the engine
●Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system.
●Do not race a cold engine.
●If the engine becomes difficult to start or stalls frequently, have the engine checked immediately.

    When the steering lock cannot be released
    When starting the engine, the engine switch may seem stuck in the “LOCK” position. To free it, turn the key while turning the steering wheel slightly left and right. ...

    Engine (ignition) switch (vehicles with a smart key system)
    Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ...

    See also:

    Important safety notes
    WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle ...

    Connecting procedure
    1. Press the SETTING button on the instrument panel and select the “Bluetooth” key on the display. 2. Select the “Connect Bluetooth” key. 3. A popup box will appear on the screen, pro ...

    Anti-theft Alarm System Messages
    THEFT ATTEMPTED This message displays if the vehicle detects a tamper condition. ...