Subaru Legacy: Legacy
To fold down the seatback, perform the following procedure.
1. Open the trunk lid. Refer to “Opening the trunk lid (Legacy)” F2-9 or “To open the trunk lid from inside” F2-24.
1) Release lever
2. Pull the release lever on the side that you want to fold down.
3. Fold the seatback down.
To return the seatback to its original position, raise the seatback until it locks into place and make sure that it is securely locked.
Folding down the rear seatback
WARNING
● When you fold down the seatback, check that there are no passengers or objects
on the rear seat. Not doing so creates a risk of injury or property damage if the
seatback suddenly ...
Outback
Unlock the seatback by pulling the release lever and then fold the seatback down.
To return the seatback to its original position, raise the seatback until it locks
into place and make sure that ...
See also:
Automatic locking
The setting is stored for the remote control currently
in use.
1. "Settings"
2. "Door locks"
3. Select the desired function:
▷ "Lock if no door is opened"
T ...
To Play the FM/AM Radio
The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position. Press the AUDIO button to
view the audio control display. Turn
the system on by pressing the
power/volume knob or ...
Check spark plugs and ignition system
Inspect your spark plugs as described in section 7 and replace them if necessary.
Also check all ignition wiring and components to be sure they are not cracked, worn
or damaged in any way. ...
