Subaru Legacy: Legacy
NOTE
It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary.
1. Open the trunk.
2. Remove the trunk trim lining by removing the 12 clips and the trunk trim handle.
3. Turn the bulb socket counterclockwise and remove it.
4. Pull the bulb out of the bulb socket and replace it with a new one.
5. Install the bulb socket by turning it clockwise.
6. Reinstall the trunk trim lining.
Outback
1. Remove the mounting screws using a Phillips screwdriver.
2. Remove the lens.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the lens.
6. Tighten the mounting screw ...
See also:
Getting started
Voice control button on the steering wheel ...
Variable voltage control system
CAUTION
● Do not ground accessories directly to
the battery terminal. Doing so will bypass
the variable voltage control system
and the vehicle battery may not
charge completely.
● ...
Instrument Panel, Vinyl, and Other Plastic Surfaces
To remove dust, a soft cloth dampened with water can be used.
If a more thorough cleaning is necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and dir ...
