Buick Regal: License Plate Lamp - Bulb Replacement - Vehicle Care - Buick Regal Owners ManualBuick Regal: License Plate Lamp

To replace one of these bulbs:

1. Push the release tab (A) toward the lamp assembly. Passenger Side Shown, Driver Side Similar

1. Push the release tab (A) toward the lamp assembly.
2. Pull the lamp assembly down to remove.

A. Bulb Socket

A. Bulb Socket
B. Bulb
C. Lamp Assembly

3. Turn the bulb socket (A) counterclockwise to remove it from the lamp assembly (C).
4. Pull the bulb (B) straight out of the bulb socket.
5. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly.
6. Push the lamp assembly back into position until the release tab locks into place.

    Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
    A. Taillamp/Sidemarker Lamp B. Taillamp C. Stop/Turn Signal Lamp D. Back-up Lamp To replace any one of these bulbs: 1. Open the trunk. See Trunk Release . 2. Remove the taillamp assembly ...

    Replacement Bulbs
    For replacement bulbs not listed here, contact your dealer. ...

    See also:

    How HD broadcasting works
    HD Radio works similarly to conventional radio and broadcasts of this type are available in many areas of the United States. However, there are a few key differences: Instead of transmitting one ...

    Installing The LATCH-Compatible Child Restraint System
    We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully foll ...

    Adjusting the four-way lumbar support
    You can adjust the contour of the front seat backrests individually to provide optimum support for your back. 1. To raise the backrest contour 2. To soften the backrest contour 3. To lo ...