Chrysler 200: License Plate Lamp - Bulb Replacement - Maintaining your vehicle - Chrysler 200 Owners ManualChrysler 200: License Plate Lamp

1. Using a small screwdriver, press inward the locking tab on the side of the lamp assembly and pull down on the lamp assembly for removal.

2. Pull bulb from socket, replace, and reinstall the lamp assembly into place ensuring the locking tab is secure.

    Backup Lamps
    1. Open the trunk and gently pull back the trunk liner behind the tail lamp (requires removal of a push pin holding the trunk trim in place near the tail lamp). 2. Remove the two plastic wing nut ...

    See also:

    Engine compartment check locations
    QR25DE engine 1. Power steering fluid reservoir (P. 8-14) 2. Engine oil filler cap (P. 8-10) 3. Brake fluid reservoir/Clutch fluid reservoir (M/T model) (P. 8-15, 8-15) 4. Air cleaner (P. 8-20) ...

    Battery
    WARNING ● Before beginning work on or near any battery, be sure to extinguish all cigarettes, matches, and lighters. Never expose a battery to an open flame or electric sparks. Batteries gi ...

    Installing The LATCH-Compatible Child Restraint System
    We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully foll ...