Volvo S60: License plate lighting
1. Remove the screws with a screwdriver.
2. Carefully detach the entire bulb housing and pull it out.
3. Replace the bulb.
4. Reinsert the entire bulb housing and tighten the screws.
Location of taillight bulbs
Brake lights (LEDs) Brake light Backup light Turn signals Rear fog light (driver’s side only) NOTE If an error message remains in the display after a faulty bulb has been repla ...Trunk lighting
NOTE Before starting to replace a bulb, see page 306. The trunk lighting is located on opposite sides of the trunk. 1. Insert a screwdriver and gently turn so that the bulb housing comes loo ...See also:
Measurement of weights
Secure loose items to prevent weight shifts that could affect the balance of
your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and
the rear wheels separately to determ ...
Steering, Suspension, and
Chassis Components
Visually inspect front and rear
suspension and steering system for
damaged, loose, or missing parts or
signs of wear. Inspect power
steering lines and hoses for proper
hook-up, binding, leak ...
Active chassis (Four C)
Active chassis, Four-C (Continuously Controlled Chassis Concept), regulates the
characteristics of the shock absorbers so that the car's driving characteristics
can be adjusted. There are thre ...