Ford Fusion: Lighting control
Lighting control positionsOff ASide and tail lamps BHeadlamps C
Autolamps
Note: If you have switched autolampson, you can only switch the main beamon when autolamps has switched theheadlamps on.
The headlamps will come on and go offautomatically depending on the ambientlight.
Home safe lighting
You can switch home safe lighting on upto 10 minutes after you have switched theignition off.
Vehicles without autolamps
Switch the headlamps on and then switchthem off within two seconds.
Vehicles with autolamps
a. Switch autolamps on and then switchthem off within two seconds.
b. Switch autolamps off and then switchthem on within two seconds.
Welcome lighting
The side and tail lamps will come on whenyou unlock the doors with the remotecontrol. They will switch off automaticallyafter a short time.
Main/dipped beam
Pull the lever fully towards the steeringwheel to switch between main anddipped beam.
Headlamp flasher
Pull the lever slightly towards the steeringwheel.
Lighting
...Front fog lamps
Front fog lamps Note: It is not possible to switch on thefront fog lamps when the lighting switchis set to AUTO. To switch on the front foglamps, switch off the autolamps feature. Switch on the head ...See also:
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated ten times while the lights are on and
the engine is running ...
Reporting Safety Defects to the Canadian Government
If you live in Canada, and you
believe that the vehicle has a safety
defect, notify Transport Canada
immediately, and notify General
Motors of Canada Limited. Call
Transport Canada at
1-80 ...
Odometer/Twin trip odometer
The odometer/twin trip odometer is displayed
when the ignition switch is placed in the ON
position.
The odometer records the total distance the vehicle
has been driven.
The twin trip odometer rec ...