Chrysler 200: Locking The Doors With The Key
There is only one external door lock cylinder which is located in the driver’s door.
You can insert the key with either side up. To lock the door, turn the key rearward. To unlock the door, turn the key forward. For door lock lubrication, see “Maintenance Procedures” in “Maintaining Your Vehicle” of this manual.
Key-In-Ignition Reminder
Opening the driver’s door when the key is in the ignition sounds a signal to remind you to remove the key. NOTE: • The Key-In-Ignition reminder only sounds when the ignition key is placed in ...Sentry Key
The Sentry Key Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whethe ...See also:
Flash-to-Pass
To flash the high beams, pull the
turn signal/lane change lever toward
you, and release. ...
All-Wheel Drive warning light (AT and CVT models)
WARNING
Continued driving with the AWD warning light flashing can lead to powertrain
damage. If the AWD warning light flashes, promptly park in a safe place then check
whether all four tires ar ...
Top tether anchor point locations
The child restraint top tether strap must be used
when installing the child restraint with the LATCH
lower anchor attachments or seat belts. See “Installing
top tether strap” later in this se ...