Chrysler 200: Loose Filler Cap Message - Adding Fuel - Starting and operating - Chrysler 200 Owners ManualChrysler 200: Loose Filler Cap Message

If the vehicles diagnostic system determines that the fuel filler cap in loose, improperly installed, or damaged, a “gASCAP” message will be displayed in the instrument cluster. Tighten the gas cap until a “clicking” sound is heard. This is an indication that the gas cap is properly tightened. Press the trip odometer reset button to turn off the message. If the problem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the MIL. Resolving the problem will turn the MIL off.

    Fuel Filler Cap (Gas Cap)
    The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. Fuel Fi ...

    See also:

    Getting started
    Use the controls on the steering wheel keypad and in the center console to access, navigate and make selections in the hands-free system’s menus. ...

    Audio control buttons (if equipped)
    Type A audio Type B audio These buttons are located on the spokes of the steering wheel. They allow the driver to control audio functions without taking his/her hands off the steering wheel. ...

    Technical specifications
    Vehicle fluids * Providing it meets the specification defined by WSS-M2C913-C, you can also useFord Engine Oil or an alternative engine oil. Topping up the oil: If you are unable to find an oil ...