Mercedes-Benz E-Class: Lowering the vehicle
WARNING
Vehicles with a spare wheel with a collapsible
spare wheel only: do not inflate the collapsible
spare wheel until it has been mounted.
Inflate the collapsible spare wheel using the tire inflation compressor before lowering the vehicle.
•► Turn the crank of the jack counterclockwise until the vehicle is once again standing firmly on the ground.
•► Place the jack to one side.
•► Tighten the wheel bolts evenly in a crosswise pattern in the sequence indicated (1 to 5). The tightening torque must be 96 lb-ft (130 Nm).
WARNING
Have the tightening torque checked
immediately after a wheel is changed. The
wheels could come loose if they are not
tightened to a torque of 96 lb/ft (130 Nm).
Turn the jack back to its initial position and store it together with the rest of the tirechange tool kit in the trunk/cargo compartment.
•► AMG vehicles and vehicles with AMG equipment: insert the cover into the outer sill.
Vehicles with an emergency spare wheel:
•► Transport the defective wheel in the trunk/
cargo compartment.
or
•► Depending on the size of the wheel, you
may also be able to secure the defective
wheel in the spare wheel well. In this case,
you will have to remove the stowage well
casing from the spare wheel well and stow
it securely in the trunk/cargo
compartment.
For further information on stowing the collapsible spare wheel.
When you are driving with the collapsible spare wheel mounted, the tire pressure loss warning system or the tire pressure monitoring system cannot function reliably. Only restart the tire pressure loss warning system/tire pressure monitoring system when the defective wheel has been replaced with a new wheel.
Vehicles with tire pressure monitoring system: all mounted wheels must be equipped with functioning sensors and the defective wheel should no longer be in the vehicle.
Inflating the collapsible spare wheel
WARNING Inflate the collapsible spare wheel only after the wheel is properly attached. Inflate the collapsible spare wheel using the tire inflation compressor before lowering the vehicle. ...MOExtended tires (tires with run-flat properties)
MOExtended tires (tires with run-flat properties) allow you to continue driving your vehicle even if one or more tires are entirely deflated. MOExtended tires may only be used in conjunction ...See also:
Activating and deactivating the alarm system
To change the setting of your vehicle’s alarm system for activation or deactivation,
do the following.
1. Disarm the alarm system. Refer to “Disarming the system” F2-18.
2. Sit in the driver ...
Power Mirrors
Power Mirrors
To adjust the mirrors:
1. Turn the control knob to the
L (left) or R (right) selecting the
driver or passenger mirror.
2. Push the control knob to the left,
right, up, or down ...
General Information
The Sentry Key system complies with FCC rules part 15
and with RSS-210 of Industry Canada. Operation is
subject to the following conditions:
• This device may not cause harmful interference.
...