BMW 5 Series: Malfunction
A Check Control message is displayed.
On the Control Display, the areas in front of and behind the vehicle are shaded. PDC has failed.
Have the system checked.
To ensure full operability:
▷ Keep the sensors clean and free of ice.
▷ When using a pressure washer, keep the
sprayer moving and maintain a distance of
at least 12 in/30 cm from the sensors.
Display on the Control Display
Switching on the backup camera via the
iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The setting
is stored for the remote control currently in ...
Surround View
The concept
Surround View includes the following systems:
▷ Backup camera
▷ Side View.
▷ Top View.
It assists the driver when parking, maneuvering
and on blind driveways and i ...
See also:
Read firstthen drive safety
Before driving your vehicle, please read this Owners Manual carefully. This will
ensure familiarity with controls and maintenance requirements, assisting you in
the safe operation of your vehicle. ...
Personal lights
Front
Turns the lights on/off
Rear (vehicles with moon roof)
Turns the lights on/off ...
Brake and clutch (if so equipped) fluid
For further brake and clutch fluid specification
information, refer to “Capacities and recommended
fuel/lubricants” in the “Technical and
consumer information” section of this manual.
WARN ...